The case slides open to reveal a clever mechanism. Simply insert the needle with the eye facing open to the threader pin, push down on the lever to test. If you feel resistance, Stop, the needle is not correctly aligned. Realign needle and retest.
Once correctly aligned, lay the thread into the “V” groove.
The new “sure guide” button ensures that if the needle is inserted incorrectly, the threader pin is protected. However, care must still be taken to ensure the needle eye is open to the threader pin.
The bottom of the case hides a storage area & a handy magnet. There is a thread cutter on the underside.
- Stock Status: In Stock